Asetek Invicta Direct Drive Wheelbase, 27 Nm: Specs, Torque and Compatibility
The Asetek Invicta Direct Drive Wheelbase, 27 Nm is a direct drive wheel with 27 Nm of peak torque, working on PC. Base only, rim and pedals sold separately. Mounting requirement: heavy steel or aluminium profile rig required. Price band: over $700.
The Asetek Invicta Direct Drive Wheelbase, 27 Nm is a direct drive wheel rated at 27 Nm of peak torque , supported on PC, and it needs heavy steel or aluminium profile rig required. Base only, rim and pedals sold separately. Flagship of the Asetek range.
What are the Asetek Invicta Direct Drive Wheelbase, 27 Nm specifications?
Every figure below is a manufacturer published specification or a directly observable property of the product. Where Asetek SimSports does not publish a figure, the row is left out rather than filled with an estimate, because a confident wrong number is worse than a missing one when you are deciding what your rig has to hold.
| Specification | Invicta |
|---|---|
| Brand | Asetek SimSports |
| Model | Invicta |
| Drive type | Direct drive |
| Peak torque | 27 Nm |
| Torque band | 12 Nm and above |
| Platforms | PC |
| In the box | Base only, rim and pedals sold separately |
| Detachable rim | Yes |
| Mounting needed | Heavy steel or aluminium profile rig required |
| Price band | Over $700 |
How much torque does the Invicta produce, and what does that mean?
At 27 Nm the Invicta sits in the 12 nm and above band, which is more torque than most drivers will ever use. Heavy steel or aluminium profile mounting is mandatory, and a software torque limit should be set before the base is first powered up. The reason to own a base like this is headroom: run at a third of its ceiling it never clips, never runs out of authority over a kerb, and never compresses detail at the top of its range.
Peak torque is a ceiling, not a setting. Almost nobody drives with overall gain at maximum, because a base running near its limit clips: several different forces arrive at the same saturated value and you lose the ability to tell them apart. That is the real reason a stronger base can feel more detailed at low output than a weaker one does at high output. If you want to see how a figure translates into force at the rim, the wheelbase torque calculator does the conversion and checks it against your mounting.
What rig does the Invicta need?
Heavy steel or aluminium profile rig required. Force feedback is a reaction force, which means the base is pushing against your hands and the mount at the same time. On a desk clamp that reaction goes into a desk designed to hold a monitor. On a bolted cockpit it goes into the frame and then into the seat, and the seat is loaded by your own body weight, so nothing moves.
This is why the rig should be chosen before the base rather than after. A base you cannot mount properly is a base you have to run turned down, at which point you have paid for headroom you are not using. Work through the rig space calculator to check the frame fits your room, and read wheel stand versus full cockpit for where the rigidity line actually falls.
Which platforms does the Invicta work with?
The Invicta is a PC device. Console licensing is enforced in hardware on both PlayStation and Xbox, so no adapter reliably makes a PC-only base authenticate on a console. If you race on a console, this base is not an option regardless of how good the specification looks.
One further check before ordering: peripherals attached to a wheel often inherit its platform restrictions. A shifter or a pedal set that routes through the base rather than straight to a PC over USB will only work where the base works. The wheel compatibility chart lists which accessories connect to which bases.
Who should buy the Invicta, and who should not?
A flagship in every sense including the safety envelope. Set a software torque limit before the first launch, keep thumbs out of the spokes, and treat calibration sweeps as a moment to stand clear.
Best for: Professional and semi-professional installations on rigid frames.
What should you compare the Invicta against?
These are the models most often cross-shopped against it, either at the same price or at the next step of the same upgrade path. Torque figures are only listed where the manufacturer publishes one.
| Model | Drive | Peak torque | Platforms | Price band |
|---|---|---|---|---|
| Asetek SimSports Invicta | Direct drive | 27 Nm | PC | Over $700 |
| Asetek SimSports Forte | Direct drive | 18 Nm | PC | Over $700 |
| Simucube 2 Pro | Direct drive | 25 Nm | PC | Over $700 |
| MOZA R21 | Direct drive | 21 Nm | PC | Over $700 |
What gain should you set on the Invicta?
Gain is working torque divided by peak torque. Pick the force you want at the rim, read the percentage, and set it once in the driver software rather than per car. Per car adjustment belongs to the in-game force feedback multiplier, and changing the driver ceiling per car makes every setup number you have already written down meaningless.
| Torque you want at the rim | Gain to set | Headroom left in reserve | Reachable on this base |
|---|---|---|---|
| 4 Nm | 15% | 23 Nm | Yes |
| 5 Nm | 19% | 22 Nm | Yes |
| 6 Nm | 22% | 21 Nm | Yes |
| 7 Nm | 26% | 20 Nm | Yes |
| 8 Nm | 30% | 19 Nm | Yes |
| 10 Nm | 37% | 17 Nm | Yes |
A real GT car puts roughly 5 to 8 Nm through the steering wheel at racing speed, so the middle rows of that table are the realistic ones. Running higher is a preference rather than a realism setting, and it costs precision and stamina over a long stint. The headroom column is the one that matters on a strong base: it is what stops a kerb strike landing on top of cornering load and flattening off against the ceiling. Published figures for every model are in the wheelbase torque chart.
What else do you have to buy alongside the Invicta?
The Invicta is sold as a base. There is no rim in the box and no pedals, and that is the single most common way a budget for one of these gets blown: a base price is compared against a complete bundle price and the two are not the same purchase. Budget roughly $76 upward for a rim and $160 upward for a load cell pedal set before comparing this against anything that arrives ready to drive.
Three costs sit outside almost every box in this category and belong in the budget from the start. A frame that can react the forces, because torque you cannot mount is torque you cannot use. A powered USB hub, because a base, pedals, a shifter and a button box is four devices before anything else and a front panel header often cannot supply the current. And a floor mat on carpet, because a frame that settles unevenly into pile starts rocking within weeks and never stops. Price the whole rig at once in the build cost calculator rather than one component at a time.
Where the Invicta fits in a build
A wheel is one part of a chain, and it is rarely the part that limits a driver. The order that produces the fewest regrets is frame first, then pedals, then base, then screens. A rigid frame makes every other component behave predictably. A load cell brake changes lap time consistency more than any base upgrade, because braking is where most amateur time is lost. The base is third because it improves the information arriving at your hands, which only helps once the two things underneath it are stable.
If you are starting from nothing, read the first rig buying order before spending anything. If you already have a wheel and are deciding what to replace next, the upgrade order guide covers the same question from the other end. And if you are still choosing between drive types rather than between models, direct drive versus belt versus gear explains what actually changes between them.
Specifications are drawn from manufacturer published figures and product listings and can change between hardware revisions. Confirm current specifications with the manufacturer before purchase, and see the full list at all wheels and wheelbases.
Frequently asked questions
How much torque does the Invicta produce?
Asetek SimSports publishes 27 Nm of peak torque for the Invicta, which places it in the 12 nm and above band. Peak torque is a ceiling rather than a running figure, and most drivers set overall gain well below it so the base never clips. The practical consequence of the number is the mounting it demands: heavy steel or aluminium profile rig required. Treat the figure as headroom you are buying rather than force you will constantly feel.
What rig or mount does the Invicta need?
Heavy steel or aluminium profile rig required. Force feedback is a reaction force, so whatever the base pushes against has to push back. On a desk clamp the reaction goes into the desk, which flexes and rattles. On a bolted cockpit it goes into the frame and then into the seat you are sitting in, which is heavy and well braced. Torque you cannot mount is torque you cannot use, so the frame decision comes before the base decision.
Does the Invicta work on PC?
Yes. The Invicta lists PC as supported. Console licensing is enforced in hardware rather than in software on both PlayStation and Xbox, so a wheel licensed for one console family will not authenticate on the other and no adapter reliably changes that. Confirm the exact variant on the listing matches your platform, because manufacturers often sell near-identical wheels under separate model codes per console.
Does the Invicta come with pedals?
Base only, rim and pedals sold separately. This matters more than it sounds when comparing prices, because a base sold on its own needs a rim and a pedal set before it can be driven at all, and those can easily add half the base price again. When you compare a bare base against a complete bundle, add the missing parts to the bare base first or the comparison is meaningless.
Can you change the steering wheel rim on the Invicta?
Yes, the rim detaches from the base, so you can run a round rim for GT and road cars and a formula style rim for open wheelers. Swapping rims per car class is the main practical reason to own a base with a quick release. Confirm the release standard before buying a third party rim, because the mounting patterns are not interchangeable between manufacturers.
Is the Invicta still worth buying?
A flagship in every sense including the safety envelope. Set a software torque limit before the first launch, keep thumbs out of the spokes, and treat calibration sweeps as a moment to stand clear.
How we choose: we compare published manufacturer specifications, documented torque and travel figures, and verified owner reviews. We do not test gear in person. Everything here is researched guidance, not professional installation advice. Direct drive wheelbases produce enough torque to injure a wrist, and rig hardware carries real weight, so follow the manufacturer's mounting and torque limits.